Research on carbonate reservoir matrix model building based on porosity cycles
-
摘要: 储层建模涉及到多种技术,任何一项技术的改进都会对模型精度产生影响。碳酸盐岩储层在形成过程中经历成岩、构造等作用,使储层变得复杂、非均质,但对于孔隙层、溶洞层由张开裂缝连通的似块状储渗体构架碳酸盐岩储层来说,孔隙层和溶洞层的分布具有规律性和旋回性。该文以四川盆地某气藏为例,提出基于孔隙度旋回作为建模单元建立碳酸盐岩储层基质地质模型,以达到提高储层模型精度的目的,即寻找孔隙度曲线上的变化规律,划分孔隙度旋回,然后以孔隙度旋回为建模单元,采用确定性建模和随机建模相结合的方法建立碳酸盐岩储层基质模型,有效地提高储层模型精度。Abstract: Reservoir modeling refers to many technologies, and the improvements on any of which will affect model accuracy. Despite that digenesis and tectonic factors have made carbonate reservoirs become complicated and heterogeneous, for pore or cave layer carbonate reservoirs connected by extensional fractures, the distribution of pore or cave layers has regularity and cyclicity. Taking a gas reservoir in the Sichuan Basin as an example, porosity cycle is put forward as a model unit to build up carbonate reservoir matrix geological model. Porosity cycles are divided based on the change law of porosity curves. Then with these porosity cycles, combining deterministic modeling with stochastic simulation, carbonate reservoir matrix geological model is developed to increase reservoir modeling precision.
-
Key words:
- porosity cycle /
- carbonate rock /
- reservoir modeling /
- model unit /
- Sichuan Basin
-
[1] 何登发,贾承造.冲断构造与油气聚集[J].石油勘探与开发,2005,32(3):552-62. [2] Finch E,Hardy S,Gawthorpe R.Discrete element modeling of contractional fault-propagation folding above rigid basement fault blocks[J].Journal of Structural Geology,2003,25(4):515-528. [3] Hardy S,Ford M.Numerical modeling of trishear fault-propagation folding[J].Tectonics,1997,16(5):841-854. [4] Allmendger R W.Inverse and forward numerical modeling of trishear fault-propagation folds [J].Tectonics,1998,17(4):640-656. [5] 宋子齐,杨红刚,孙颖,等.利用岩石物理相分类研究特低渗透储层参数建模[J].断块油气田,2010,17(6):672-677. [6] 郑应钊,刘国利,马彩琴,等.多条件约束地质建模技术在青西油田裂缝性油藏中的应用[J].油气地质与采收率,2011,18(3):77-80,93. [7] 刘蕊,盛海波,蔡玥,等.塔河油气田AT1区块凝析气藏三维地质建模研究[J].地球科学与环境学报,2011,33(2):168-171. [8] 高晓歌,谢麟元,齐陆宁.建筑结构控制下的油藏属性建模[J].断块油气田,2010,17(4):434-438. [9] 张永贵,刘振峰.鄂尔多斯盆地北部上古生界致密砂岩气藏储层建模[J].石油与天然气地质,2011,32(4):560-567. [10] 李伶俐,何生,马伟竣.随机建模在大牛地气田新区早期气藏描述中的应用[J].断块油气田,2010,17(3):280-284. [11] 丁圣,林承焰,周明晖,等.油藏地质建模及实时跟踪研究[J].地球科学与环境学报,2010,32(1):70-72. [12] 苏海芳.井间地震资料约束技术在油藏精细建模中的应用[J].油气地质与采收率,2011,18(3):47-48,60. [13] 周炜,唐仲华,温静,等.应用数值模拟技术研究剩余油分布规律[J].断块油气田,20010,17(3):325-329. [14] 刘建华,朱玉双,胡友洲,等.安塞油田H区开发中后期储层地质建模[J].沉积学报,2007,25(1):110-115. [15] 兰义飞,王东旭.相控建模在剥蚀残留碳酸盐岩储层中的应用[J].天然气工业,2007,27(8):52-53. [16] 胡向阳,熊琦华,吴胜和.储层建模方法研究进展[J].石油大学学报(自然科学版),2001,25(1):107-112. [17] 刘立峰,孙赞东,杨海军,等.塔中地区碳酸盐岩储集相控建模技术及应用[J].石油学报,2010,31(6):952-958. [18] 高博禹,孙立春.基于单砂体的河流相储层地质建模方法探讨[J].中国海上油气,2008,20(1):34-37. [19] 梁积伟,李宗杰,刘昊伟,等.塔里木盆地塔河油田S108井区奥陶系一间房组裂缝性储层研究[J].石油实验地质,2010,32(5):447-452. [20] 王允诚,孔金祥.气藏地质[M].北京:石油工业出版社,2004:341-350. [21] 徐景祯,刘晓冬,陶官仲.渗透率建模的三维指示条件模拟方法及其应用[J].石油学报,2000,21(3):61-65. [22] 兰立新.储层地质建模技术及其在油藏描述中的重要性:以南堡油田为例[J].西北大学学报(自然科学版),2006,36(6):988-991. [23] Deuth C V.Geostatistical Reservoir Modeling[M].New York:Oxford University Press,2002:4-10.
点击查看大图
计量
- 文章访问数: 3533
- HTML全文浏览量: 24
- PDF下载量: 1651
- 被引次数: 0