Eliminating water lock by nitrogen injection in condensate gas field
-
摘要: 注氮气解水锁工艺是目前塔北地区凝析气田增产的一项创新试用措施。通过对注氮气解水锁工艺的原理进行阐述,结合工程实际中已施工4口井的概况和效果,对该工艺过程中常见的注入气量的确定、选井标准、施工压力曲线特征和何时结束施工等问题进行了分析和探讨。得出了有油气、有能量、有隔夹层、是水锁、是低孔低渗、无堵塞和无漏失的凝析气井适宜进行注氮气解水锁作业,突破阶段后泵压上升至高于地层压力可结束施工等结论。Abstract: The technology of eliminating water lock by nitrogen injection is an innovative trial measure in the northern Tarim condensate gas fields. This paper described the principle of the technology, and discussed some problems such as nitrogen injection volume, well selection criterion, characteristics of construction pressure curve and when to end construction combined with practical engineering case and effect of 4 wells. It is concluded that condensate gas wells with more oil and gas, energy, interlayer, water lock, low porosity and low permeability, no plug and no leakage loss are suitable for eliminating water lock by nitrogen injection. We should end construction when pump pressure is higher than formation pressure.
-
[1] 刘成,付万春,朱红旺,等.低渗透油气藏氮气快速排液技术及其应用[J].油气地质与采收率,2003,10(2):60-63. [2] 孙永鹏,杨胜来,徐君,等.低渗油藏单井N2吞吐效果影响因素实验研究[J].断块油气田,2011,18(1):83-86. [3] 李雷寿.近井带反凝析污染解决方法的研究.大庆:东北石油大学,2011.
点击查看大图
计量
- 文章访问数: 800
- HTML全文浏览量: 47
- PDF下载量: 566
- 被引次数: 0