Capillary pressure curves to determine gas-water contact in sandstone reservoirs
-
摘要: 由于位于大涝坝2号构造苏维依组上气层边部的S45井未钻遇气水界面,在储量计算中取该井上气层砂层底界为气水界面,导致气水界面取值存在较大误差,严重影响了储量的真实性。根据毛管压力原理,采用逆向思维,根据含气饱和度计算含气高度,确定气藏的气水界面。应用该方法计算的大涝坝2号构造苏维依组下气层气水界面位置与实际情况较为吻合,用此方法计算了苏维依组上气层的气水界面,并据此计算了上气层储量。Abstract: In the drilling of well S45, which is on the edge of the Upper Suweiyi Formation in Dalaoba-2 structure, we did not find the gas-water contact, and took the sand bottom boundary of this well as gas-water contact in reserve calculation, which led to a big error and seriously affected the authenticity of reserves. This paper, based on the principle of capillary pressure, used reverse-hinking, and calculated the height of gas by gas saturation, and then determined the gas-water contact for gas reservoir. Using this method, we calculated the gas-water contact for the Lower Suweiyi Formation of Dalaoba-2 Structure, and it was nearly the same as the actual gas-water contact. We also calculated the gas-water contact for the Upper Suweiyi Formation, and then predicted reserve.
-
Key words:
- capillary pressure /
- gas-water contact /
- reserve calculation
-
[1] 何更生.油层物理[M].北京:石油工业出版社,1994:206-207. [2] 伍藏原.利用试井数据确定凝析气藏气水界面位置[J].油气井测试,2004,13(3):16-17. [3] 魏兴华.压汞资料在确定油水界面中的应用[J].新疆石油天然气,2005,1(2):29-34. [4] 彭彩珍.流纹岩类储层压汞毛管压力曲线测定和应用[J].钻采工艺,2005,28(4):51-54.
点击查看大图
计量
- 文章访问数: 902
- HTML全文浏览量: 90
- PDF下载量: 255
- 被引次数: 0